Wheels & Tires

Before Washing

To avoid ruining the shiny result of a car wash, always start with cleaning the wheels.

Wheel Cleaning

Brake dust can cause permanent damage to the surface of your wheels. Therefore, never forget the wheels during any wash – only with regular, thorough care will wheels remain the highlights of your car.

Wheel Spray "Wheel"

1. Thoroughly rinse wheels with a strong water jet.

2. Fill the Swissvax Mixing Bottle with Wheel Concentrate up to the "1" mark. Fill with water (up to "1:1" for heavily soiled wheels, "1:2" or "1:3" for normally soiled wheels).

3. Generously spray wheels and immediately clean with Swissvax Wheel Brush and/or Micro-Wash Microfiber Cloth (yellow).

4. Thoroughly rinse wheels with a strong water jet and dry after washing the car.

"Wheel Spray Forte"

Swissvax Wheel Spray Forte is a modern, extremely effective wheel cleaner with a colored cleaning indicator. Acid-free (!) and almost pH-neutral, it can be safely used on aluminum wheels, painted wheels, or spoke wheels.

1. Generously spray wheels. After the active cleaning phase, the product turns reddish-violet thanks to the built-in cleaning indicator.

2. Rinse with a strong water jet. Done!

3. Dry wheels after washing the car.

Wheel Wax

Swissvax Autobahn Wheel Wax gives your wheels a visible fine shine and repels dirt. Brake dust, salt, moisture, and other road dirt can hardly penetrate the protective layer of heat-resistant carnauba wax, enriched with PTFE. Swissvax Autobahn Wheel Wax is safe for wheels made of aluminum, polished aluminum, magnesium, chrome, or with painted surfaces.

Application

1. Thoroughly clean wheels.

2. New wheels must be pre-treated with Swissvax Cleaner Fluid Regular, used wheels with Paint Rubber and Cleaner Fluid Regular.

3. Apply Autobahn Wheel Wax with a Swissvax sponge applicator (black).

4. Allow to act for about 10 minutes.

5. Polish to a shine with a clean Swissvax Micro-Polish microfiber cloth (blue). Keep turning the cloth.

Pneu

Swissvax Pneu is an emulsion of gloss and care substances. It replaces lost moisture in the rubber compound and protects the surface from discoloration and cracking.

Application

1. Clean tires and let them dry.

2. Then simply spray Swissvax Pneu on the tire flanks or apply with a Swissvax Pneu brush or Swissvax Puck (black).

3. Let it act for 5 minutes. The milky white film changes to a deep black appearance.

4. Wipe off any splashes or residues on wheels, hubcaps, or chrome spokes with a clean Swissvax cloth.

IMPORTANT

Do not use on two-wheeled vehicles. Risk of slipping!

Pneu White

Pneu White is a powerful whitewall cleaner that removes dirt and yellowing.

APPLICATION

1. Use rubber gloves and eye protection.

2. Spray Pneu White on the included Pneu White pad.

3. Thoroughly clean the whitewall with the soaked pad and rinse with clear water. Repeat the application in case of heavy dirt/yellowing.

4. Let the tires dry and finally spray with Pneu tire care.